|
|
Kenmore Ice And
Water Filter Cartridge
When someone owns a Kenmore ice and water filter
cartridge, they will have to
change it frequently to keep it fresh. A new and
fresh filter will ensure that water is cleaned and purified the way that it
should be. There are certain guidelines around the process of changing a Kenmore
ice and water filter cartridge. The process should be completed during the time
periods recommended.
Most people will change their filters every three to six months depending on the
amount of use. A large family who is always using the water in the fridge, may
need to change the filter more often. A small family who may only use the water
filter a few times a day at the most can get away with six months between
changing.
Cartridges can be bought at the same place that the fridge was purchased or at
another recognized place. In order to pick up the right model, the consumer will
need to find the serial number on the fridge and then match it to the cartridge.
The best way to change the cartridge, is to turn off the ice and water power
switch. Remove the cup that is covering it and ensure that a bucket is held
underneath to catch any dripping water that may leak out.
The old filter can be taken off and the new one replaced. When the filter is in
place, the cup can be screwed by hand back in place. It is important that the
cup not be tightened too much to prevent the wear and tear of the materials. The
power can be turned back on and the water run for a few minutes for testing
purposes.
A Kenmore ice and water filter cartridge will do a good job of cleaning the cold
water from the fridge. It will last a long time and clean the water as it
should. If someone needs a cold glass of water, they can use their fridge for a
healthy supply.
Kenmore
ice and water filter cartridge to water filter cartridges
Kenmore ice and water filter cartridge to water filter
reviews
|
|
