|
|
GE MSWF Smartwater Refrigerator Water Filter
The GE Smartwater MSWF Refrigerator Water Filter is placed in the
inside of your
refrigerator above the top shelf in the back, upper, right hand
corner. This water filter works in a twist installation so you can easily
untwist the old filter, fill the new filter with water and twist in the new
filter.
It takes all of one minute to change filters. If you change filters based on the
status light then you will need to reset this every time you change the water
filter. The directions for installation can be found with the water filter or
with your refrigerator model.
It is recommended that you replace your water filter every 6 months or when the
change filter light turns on. The life of each filter will depend on its use and
the quality of your water. The GE Smartwater MSWF Refrigerator Water Filter
meets and exceeds NSF/ANSI standards 42 and 53, which are set by NSF
International. As with most water filters it does not remove fluoride. These
standards refer to the elimination of chemicals and particles in the water.
The water filter has some performance guidelines you should stay within
concerning pressure, temperature and flow rate. Please refer to the product as
each filter has slightly different operating guidelines. Its filters out
particles that are greater then 0.5 to 1 micron and can filter about 300 gallons
pre 6 months. This filter will eliminate the up to 95% of the following
chemicals, asbestos, atrazine, cysts, toxaphene, p-dichlorobenze, carbofuran,
benzene, mercury, Lindane, Chlorine and Lead.
The GE Smartwater MSWF Refrigerator Water Filter is a replacement filter for
many models including DSS25KSWA, ESF25KGWA, GCF23KSWA, LSS25XSWA, PCF23RQWA,
PSC23MSWA, PSC25MSWA, PSF26NGWA, PSH23PGWA, and the PSH25MSWA. To check your
compatible models you can contact your manufacturer or check your model manual.
ge mswf smartwater
refrigerator water filter to ge water filters
ge mswf smartwater refrigerator water
filter to water filter reviews
|
|
